Stop Cold Drafts While Waiting for the Handyman
Winter chills often sneak into homes through door gaps, leaving us uncomfortable. When the handyman won’t arrive until after the holidays, acting fast is essential. Luckily, you can block drafts immediately with simple, effective solutions. Here’s a guide to practical DIY methods using items you likely already have.

1. Identify the Source of the Draft

First, confirm where the cold air is coming from. Run your hand along the door edges and bottom to feel for drafts. Shine a flashlight or candle near the gap; flickering indicates airflow. Measure the gap—drafts are noticeable when larger than ¼ inch. Knowing the size helps you choose the best fix.

2. Roll Up a Towel or Blanket
For an instant solution, roll a towel or blanket and press it against the bottom of the door. Ensure it covers the full width. For larger gaps (½ inch or more), secure the ends with rubber bands or twist ties. This simple trick blocks cold air immediately.

3. Make a DIY Draft Snake
Turn old clothes into a no-sew draft snake. Cut fabric to the door’s length (about 36 inches). Fill it with rice, sand, or crumpled newspaper, then tie the ends. Place it at the door base for a reusable, eco-friendly barrier.

4. Use Pool Noodles or Pipe Insulation

Cut a pool noodle or pipe insulation to the door’s width, slice it lengthwise, and slide it under the door. It blocks drafts while letting the door open and close easily.

5. Apply Temporary Weatherstripping
Foam tape or self-adhesive weatherstripping seals gaps quickly. Clean the door surface first, then press the tape along the bottom and sides. This temporary fix reduces drafts until permanent solutions are possible.

6. Add Rugs, Mats, or Heavy Curtains
Place a rug or mat in front of the door to insulate. Hang a heavy curtain or blanket over the door to trap warm air. This additional layer keeps the cold out and your home cozy.

7. Use Tape as a Temporary Seal

Painter’s or duct tape can temporarily block drafts along door edges. Smooth the tape to prevent peeling. Though not pretty, it provides immediate relief.

8. Create an Emergency Barrier
Cardboard, foam, or bubble wrap works well for quick fixes. Cut to size, tape under the door, and block the draft effectively, especially for larger gaps.

9. Rearrange Furniture

Place a bookshelf, chair, or console table near the door. It acts as a buffer, absorbing some of the cold air. While not a complete solution, it helps reduce discomfort.

10. Redirect Warm Air
Turn on your heating system and use fans to circulate warm air toward the door. This creates a barrier, preventing drafts from spreading and keeping rooms comfortable.

11. Patch Worn Weatherstripping
Inspect weatherstripping for cracks or gaps. Use adhesive tape or sealant to patch problem areas temporarily. This reinforces the seal until replacement is possible.

12. Use Draft-Blocking Hacks That Allow Door Movement
Consider double-sided draft stoppers that move with the door. They maintain a seal while letting you open and close the door freely.

13. Prepare for the Handyman
Take measurements, photos, and notes of door gaps and previous draft-blocking attempts. Documenting this helps the handyman provide an efficient, long-term solution.